China Hydrogen Standards
Identification											GB/T 3634.1-2006 Hydrogen – Part 1: Industrial hydrogen
Scope											Requirements of industrial hydrogen, test methods, packaging flag, requirements for storage and safety.
Status											Published. Available from www.standards.net.cn/
Identification									GB/T 3634.2-2011 Hydrogen – Part 2: Pure hydrogen, high pure hydrogen and ultrapure hydrogen
Scope									This Part specifies the technical requirements, test methods, packaging, marking, storage and transportation, and safety requirements for pure hydrogen, high pure hydrogen and ultrapure hydrogen. This Part is applicable to hydrogen produced by means of adsorption and diffusion, loaded in bottles and containers, and transmitted by pipeline. It is mainly used in the fields of electronics industry, petrochemical industry, metal smelting, and scientific research.
Status									Published. Available from www.standards.net.cn/
Identification											GB 4962-2008 Technical safety regulations for gaseous hydrogen use
Scope											Safety requirements for use, replacement, storage, compression and filling loading, discharge process, fire and emergency management, security protection of gaseous hydrogen.
Status											Published. Available from www.standards.net.cn/
Identification											GB 50177-2005 Design code for hydrogen station
Scope											This standard applies to new construction, renovation, expansion of the hydrogen station, pipeline design of hydrogen stations and hydrogen plant and workshop.
Status											Published. Available from www.standards.net.cn/
Identification											GB/T 3965-1995 Methods for determination of diffusible hydrogen in deposited metal
Scope											Methods for determination of diffusible hydrogen by glycerol displacement method, gas chromatography and mercury displacement method.
Status											Published. Available from www.standards.net.cn/
Identification											GB/T 7445-1995 Pure hydrogen, high purity hydrogen and ultra pure hydrogen
Scope											This standard provides technical requirements, test methods, inspection rules, packaging, marking, storage and transportation and safety requirements for pure hydrogen, high purity hydrogen and ultra pure hydrogen.
Status											Published. Available from www.standards.net.cn/
Identification											GB 19773-2005 Specification of hydrogen purification system on pressure swing adsorption
Scope											This standard provides terminology and definitions, classification and nomenclature, technical requirements, testing and inspection, packaging of hydrogen purification system on pressure swing adsorption. This standard applies to industrial, commercial stationary, mobile water electrolysis hydrogen production systems.
Status											Published. Available from www.standards.net.cn/
Identification											GB 19774-2005 Specification of water electrolyte system for producing hydrogen
Scope											This standard provides terminology and definitions, classification and nomenclature, technical requirements, testing and inspection, packaging of water electrolyte system for producing hydrogen. This standard applies to industrial, commercial stationary, mobile water electrolysis hydrogen production systems.
Status											Published. Available from www.standards.net.cn/
Identification											GB/T 24499-2009 Technology glossary for gaseous hydrogen, hydrogen energy and hydrogen energy system
Scope Status											This standard provides glossary and definitions of hydrogen, hydrogen and hydrogen energy systems technology and its application. Published. Available from www.standards.net.cn/
Identification											GB/T 26466-2011 Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen
Scope Status											This standard specifies the stationary high-pressure hydrogen storage container with steel wound wrong design, manufacture, inspection and acceptance requirements. This standard applies to both of the following conditions are stationary high-pressure hydrogen storage container with steel wound wrong: a) design pressure is greater than or equal to 10MPa and less than 100MPa, b) the design temperature is greater than or equal to -40��C and less than or equal to 80��C, c) is greater than or equal to the inside diameter of 300mm and less than or equal to 1500mm, the design pressure (MPa) and the inner diameter (mm) of the product is not above 75, 000 Published. Available from www.standards.net.cn/
Identification											GB/T 26779-2021 Hydrogen fuel cell electric vehicle refueling receptacle
Scope Status											This Standard specifies types, marks, requirements and test methods for hydrogen fuel cell electric vehicle refueling receptacle. This Standard is applicable to the hydrogen fuel cell electric vehicle refueling receptacle that uses compressed hydrogen as working medium, the rated filling pressure does not exceed 70MPa, the working temperature is -40°C~85°C. Published 2021-03-09. Available from www.standards.net.cn/
Identification										GB/T 26915-2011 Determination of energy conversion efficiency and quantum yield for hydrogen production in the solar photocatalytic water splitting system
Scope Status		This standard specifies the solar photocatalytic water splitting system energy conversion efficiency and quantum yield test and calculation process to be followed method. This standard applies to natural sun light and sunshine photocatalytic water splitting reaction simulation system. Published 2011. Available from www.standards.net.cn/
Identification						GB/T 26916-2011 Methods for performance evaluation of small-size integrative hydrogen energy system
Scope Status	This standard specifies the terms and definitions of renewable energy as the power source of small-scale integrated hydrogen energy systems, systems and technical performance parameters The number of monitoring and evaluation methods. This standard applies to the performance evaluation below 100kW small integrated hydrogen energy systems. Published 2011. Available from www.standards.net.cn/
Identification											GB/T 29411-2012 Technical specification of hydrogen-oxygen generator with water electrolyte
Scope Status											This standard specifies the water electrolysis hydrogen generator classification and naming, technical requirements, test, security technology, signage and marking, packaging and transportation. This standard applies to oxyhydrogen gas production at 0.1m3/h ~ 30m3/h of hydrogen generator. Published 2012. Available from www.standards.net.cn/
Identification											GB/T 29412-2012 Absorber of pressure swing adsorption for hydrogen purification
Scope Status											This standard specifies the PSA purified hydrogen adsorption for the basic requirements of materials, design, fabrication, inspection and testing and marking, packaging and transport. This standard applies to the design pressure is greater than and less than or equal to 0.1MPa 10MPa, no less than the degree of vacuum pressure swing adsorption of 0.02MPa Purified hydrogen adsorption device. Published 2012. Available from www.standards.net.cn/
Identification											GB/T 29729-2013 Essential requirements for the safety of hydrogen systems
Scope Status											This standard specifies the categories of hydrogen systems, the basic characteristics of hydrogen, the risk factors of hydrogen systems, the basic requirements for risk control. This standard applies to the design and use of hydrogen production, storage and delivery systems Published 2013. Available from www.standards.net.cn/
Identification											GB/T 30718-2014 Compressed hydrogen surface vehicle refueling connection devices
Scope Status											This standard specifies the compressed hydrogen vehicle filling connection means define, design requirements, safety requirements, test methods and inspection rules. This compressed hydrogen vehicle filling the device connection standard comprises two parts. The filling port and the protective cover (mounted on the vehicle), plus an air gun. This standard applies to compressed hydrogen as working medium, working pressure of 25MPa and 35MPa, an ambient temperature of 15 ℃ of compressed hydrogen vehicle filling connection means. Published 2014. Available from www.standards.net.cn/
Identification								GB/T 30719-2014 Liquid hydrogen land vehicle fueling system interface
Scope Status								This Standard specifies the characteristics of liquid hydrogen refueling and dispensing systems on land vehicles of all types. This Standard is applicable to the design and installation of liquid hydrogen (LH2) fueling and dispensing systems. Published 2014. Available from www.standards.net.cn/
Identification											GB/T 31138-2014 Compressed hydrogen dispenser for vehicles
Scope Status											This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of compressed hydrogen dispenser for vehicles. This standard is applicable to compressed hydrogen dispensers which have a rated working pressure of not more than 70 MPa for hydrogen refueling stations of hydrogen energy vehicle Published 2014. Available from www.standards.net.cn/
Identification											GB/T 31139-2014 Safety technical regulations for mobile hydrogen refueling facility
Scope Status											This Standard specifies the terms, definitions, safety technical requirements, operation safety management, and requirements of transportation and long-terms storage of mobile hydrogen refueling facility. This Standard is applicable to mobile hydrogen refueling facility, whose refueling pressure is within the range of 15 MPa ~ 70 MPa Published 2014. Available from www.standards.net.cn/
Identification					GB/T 32311-2015 Minimum allowable values of energy efficiency and energy efficiency grades for hydrogen producing systems by water electrolysis
Scope Status					This Standard specifies the minimum allowable values of energy efficiency, evaluating values of energy conservation, energy efficiency grades, test methods, and inspection rules for hydrogen producing systems by water electrolysis (hereinafter referred to as hydrogen producing systems). This Standard applies to fixed or mobile hydrogen producing systems. The structure of water electrolyser is bipolar, press-filtration, pressure type; the output is ≥5 m3/ Published 2015. Available from www.standards.net.cn/
Identification				GB/T 33291-2016 Measurement method of pressure-composition-temperature for reversable hydrogen absorption & desorption of hydrides
Scope Status				This standard specifies the pressure-composition-isotherm (PCT) test method for hydride reversible hydrogen absorption and desorption. This standard is suitable for testing in the temperature of 77K ~ 873K, pressure 0 ~ 75MPa with reversible hydrogen absorption characteristics of hydrogen hydrogenation. Published 2016. Available from www.standards.net.cn/
Identification			GB/T 33292-2016 Metal Hydride Hydrogen Storage System For Fuel Cells Backup Power
Scope Status			This standard specifies the term and definition, designation, technical requirements, test and inspection of metal hydride hydrogen storage systems for fuel cell backup power supplies. Measuring, marking and packaging. This standard applies to industrial, commercial fixed fuel cell backup power supply with metal hydride hydrogen storage system. This standard applies to the working pressure does not exceed 4MPa, the working environment temperature of not less than -40 ℃ and not higher than 45 ℃ fuel cell equipment Metal hydride hydrogen storage system for power supply Published 2016. Available from www.standards.net.cn/
Identification											GB/T 34540-2017 Specification of hydrogen production by methanol reforming and pressure swing adsorption
Scope Status											This standard specifies the methanol and desalinated water as raw materials, the use of methanol, steam and pressure swing adsorption of hydrogen purification hydrogen system Terms and definitions, classification and nomenclature, technical requirements, installation, testing and testing, marking, packaging. This standard applies to fixed methanol conversion pressure swing adsorption hydrogen system. Published 2017. Available from www.standards.net.cn/
Identification											GB/Z 34541-2017 Safety operation management regulation for hydrogen fueling facility of hydrogen vehicles
Scope
Status											Published 2017-10-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34542.1-2017 Storage and transportation systems for gaseous hydrogen – Part 1: General requirements
Scope											GB/T 34542 provisions of this part of the hydrogen storage and transportation system (hereinafter referred to as the system) the overall design, safety accessories, installation and commissioning. General requirements for operation management and risk assessment, this section applies to work pressure is not greater than 140MPa, the ambient temperature is not lower than -40 ℃ and not higher than 65 ℃ hydrogen storage system, hydrogen delivery system, hydrogen compression system, hydrogen filling system and its combined system.
Status											Published. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34542.2-2018 Storage and transportation systems for gaseous hydrogen – Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere
Scope											This Standard specifies the test equipment, test conditions and test methods for evaluating metallic material compatibility in hydrogen atmosphere. This Standard is applicable to the determination of tensile properties, fatigue properties and fracture mechanical properties of metal materials in a gaseous hydrogen atmosphere.
Status											Published 2018-05-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34542.3-2018 Storage and transportation systems for gaseous hydrogen – Part 3: Test methods for determination of the susceptibility of metallic materials to hydrogen gas embrittlement
Scope											This Standard specifies the general requirements, test equipment, sample requirements, test procedures, hydrogen embrittlement sensitivity evaluation and test report of determination of the susceptibility of metallic materials to hydrogen gas embrittlement. This Standard is applicable to the evaluation of hydrogen embrittlement sensitivity of metallic materials.
Status											Published 2018-05-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34544-2017 Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles
Scope
Status											Published 2017-10-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34583-2017 Safety technical requirements for hydrogen storage devices used in hydrogen fueling station
Scope
Status											Published 2017-10-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34584-2017 Safety technical requirements for hydrogen fueling station
Scope
Status											Published 2017-10-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34593-2017 Test method of hydrogen emission for fuel cell engine
Scope
Status											Published 2017-10-14. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 34872-2017 Technical requirements of proton exchange membrane fuel cell hydrogen supply system
Scope
Status											Published. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 35178-2017 Fuel cell electric vehicles – Hydrogen consumption -Test methods
Scope
Status											Published 2017-12-29. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 35544-2017 Fully-wrapped carbon fiber reinforced cylinder with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicles
Scope
Status											Published 2017-12-29. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 37154-2018 Fuel cell electric vehicles – Test method of hydrogen emission
Scope
Status											Published 2018-12-28. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 37244-2018 Fuel specification for proton exchange membrane fuel cell vehicle - Hydrogen
Scope
Status											Published 2018-12-28. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 37562-2019 Technical conditions of pressurized water electrolysis system for hydrogen production
Scope
Status											Published 2019-06-04. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											GB/T 37563-2019 Safety requirements for pressurized water electrolysis system for hydrogen production
Scope											This Standard specifies the hazardous and harmful factors, and basic safety requirements of pressurized water electrolysis system for hydrogen production (hereinafter referred to as hydrogen production system), as well as the requirements for environmental conditions, system components, operation and maintenance, operating personnel and emergency treatment. This Standard is applicable to alkaline water electrolysis system and proton exchange membrane water electrolysis system with an operating pressure greater than or equal to 0.3 MPa, and less than or equal to 5.0 MPa. NOTE: In this standard, pressure refers to gauge pressure.
Status											Published 2019. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification							GB 50177-2005 Design code for hydrogen station
Scope							This Code intends to implement the technical-economic policy of the State in the design of steel structures, by using advanced technology and ensuring economy, reasonableness, safety, suitability for use and good quality of the structures.
Status							Published 2005. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification						GB 50516-2010 Technical code for hydrogen fueling station
Scope						This code is established in order to implement the relevant national policies in the design, construction and operation process of the hydrogen fueling station, unify the technical requirements, and realize safety and reliability, advanced technology, energy saving and emission reduction, and economic rationality. This code applies to the design, construction, and building of the following newly built, rebuilt and extended hydrogen fueling station projects. 1 Hydrogen fueling station 2 Automobile gasoline and hydrogen fueling station 3 Automobile hydrogen and CNG fueling station The design, construction and building of the hydrogen fueling station shall, in addition to complying with this code, comply with the requirements of the relevant national standards.
Status						Published 2010. Available from www.standards.net.cn/ or http://std.samr.gov.cn/
Identification											Plan No. 20074533-T-469 Calculation of energy conversion efficiency and quantum yields for the system of solar energy photocatalytic water splitting for hydrogen production
Status											Published. Available from www.standards.net.cn/
Identification											Plan No. 20074535-T-469 Methods for Performance Evaluation of Small-Size Integrative Hydrogen Energy System
Status											Published. Available from www.standards.net.cn/
Identification											Plan No. 20083230-T-469 Fundamental Requirements on Hydrogen System Safety
Status											Published. Available from www.standards.net.cn/
Identification											Plan No. 20083231-T-469 Absorber for Pressure Swing Absorption Hydrogen Purification
Status											Under Development
Identification											Plan No. 20083232-T-469 Water Electrolyte Oxygen-Hydrogen Generator
Status											Under Development
Identification											Plan No. 20083233-T-469 Specification on Compression Hydrogen Dispenser for Surface Vehicle
Status											Under Development
Identification											Plan No. 20083235-T-469 Compressed Hydrogen Surface Vehicle Refueling Connection Devices
Status											Under Development