IEC/TS 62282-9-102
Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applications

Under Development
International


 

Organization

International Electrotechnical Commission


Identification

IEC/TS 62282-9-102

Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applications


Scope

This document provides a set of specific rules, requirements and guidelines (i.e. a so-called Product Category Rule (PCR) according to ISO 14025 and thus in line with ISO 14040 and 14044) for characterizing the environmental performance of stationary fuel cell power systems, and alternative systems for residential applications based on life cycle thinking primarily for communication to consumers. In this document, a fuel cell power system is defined as a generator system that uses one or more fuel cell stack(s) to generate electric power and heat. The environmental performance of a system is communicated to the consumer and the installer by means of an Environmental Product Declaration (EPD).

This document covers stationary fuel cell power systems and alternative heat (and power) systems for residential applications that primarily serve heating purposes. The systems can be complemented with a hot water storage tank and one or more additional heat generators. The systems are connected to the electricity grid. The environmental performance is characterized an EPD for each individual heat-related device or CHP generator separately. This document also describes how the environmental performance of a given combination of heat-related devices (including CHP generators) is characterized based on the environmental performance of its individual components. The domestic heat distribution system, district heating, or local infrastructures for fuel supply or for fuel storage are not considered.

This document focuses on residential applications, but can also be applied to applications in the tertiary sector. This document does not override, or in any way change, legally required environmental information, claims or labelling, or any other applicable legal requirements.


Status

Approved for Draft Technical Specification (DTS). Publication expected in July 2020.


Committee
Information

Chairman

Kiyoshi Dowaki

Secretariat

Japan

Secretary