ANSI/CSA FC1-2014
(IEC 62282-3-100:2012,MOD)

 
Fuel Cell Power Systems
   
Published
     United States


Organization

CSA America


Identification

ANSI/CSA FC1-2014
(IEC 62282-3-100:2012,MOD)

(formerly ANSI Z21.83) 
Fuel Cell Power Systems


Scope

This standard applies to:

a. systems intended for electrical connection to mains direct, or with a transfer switch, or to a stand-alone power distribution system;

b. systems intended to provide a.c. or d.c. power;

c. systems with or without the ability to recover useful heat;

d. systems intended for operation on the following input fuels:

1. natural gas and other methane rich gases derived from renewable (biomass) or fossil fuel sources, for example, landfill gas, digester gas, coal mine gas;

2. fuels derived from oil refining, for example, diesel, gasoline, kerosene, liquefied petroleum gases such as propane and butane;

3. alcohols, esters, ethers, aldehydes, ketones, Fischer-Tropsch liquids and other suitable hydrogen-rich organic compounds derived from renewable (biomass) or fossil fuel sources, for example, methanol, ethanol, di-methyl ether, biodiesel;

4. hydrogen, gaseous mixtures containing hydrogen gas, for example, synthesis gas, town gas.

 

This standard does not cover:

a. portable fuel cell power systems;

b. propulsion fuel cell power systems.

 


Status

Published  2004. Second edition published 2012. Harmonized with the international standard, IEC 62282-3-100: 2012,and re-published in 2014. Re-affirmed in 2018.

 

Activity for next edition, harmonized to IEC 62282-3-100:2019, has been initiated.

Available at www.csagroup.org


Committee
Information

Chairman

Eric Prause

Secretariat

CSA Group

Secretary

Mark Duda