Canadian Standards
Canadian National Standards
Canadian
Federal Regulations


Identification

CAN/BNQ 1784-000

National Standards of Canada

Canadian Hydrogen Installation Code

Published

 

Scope

The purpose of this code is to establish the installation requirements for hydrogen generating equipment, hydrogen utilizing equipment, hydrogen dispensing equipment, hydrogen storage containers, hydrogen piping systems and their related accessories.

As an example, the CHIC defines the installation requirements of hydrogen filling stations that dispense gaseous hydrogen, whether the hydrogen is produced by water electrolysis or natural gas reforming or delivered by truck in a liquid or gaseous form. It also provides guidelines for the installation of fuel cell and internal combustion engines that provide emergency or back-up power to commercial buildings and residential homes.

 

Status

Published 2007

Contact

Sylvie Gingras, BHQ Sylvie.gingras@bnq@qc.ca


Identification

CAN/CSA C22.2 No. 62282-2
Fuel Cell Technologies - Part 2
Fuel Cell Modules

        Published 

 

Scope

This is the second edition of CAN/CSA-C22.2 No. 62282-2, Fuel cell technologies Part 2: Fuel cell modules, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62282-2 (second edition, 2012-03). It supersedes the previous edition published in 2007 as CAN/CSA-C22.2 No. 62282-2 (adopted IEC 62282-2:2004). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code.

For brevity, this Standard will be referred to as "CAN/CSA-C22.2 No. 62282-2" throughout.

The Canadian deviations are intended to
a) correct inaccuracies;
b) replace references to IEC Standards with references to CSA Group Standards, where applicable; and

c) reflect recent developments in fuel cell module technology by providing explanatory material and specifying new design options.

 

Status

Published 2007. Reaffirmed 2013.

Second edition published 2018.


Identification

CAN/CSA C22.2 No. 62282-3-100:15

Fuel Cell Technologies Part 3:

Fuel Cell Power Systems Safety

      Published 

 

Scope

The adoption of the international standard, IEC 62282-3-100 (2012) with Canadian modifications.

Status

Published 2015


Identification

CAN/CSA IEC 62282-5
Fuel Cell Technologies Part 5:
Portable Fuel Cell Appliances

      Under Development

Scope

The adoption of the international standard, IEC 62282-5-1

with Canadian modifications.

 

Status

Under Development.


Classification 2.1
Hydrogen in a Metal Hydride Storage System

(classification for packaging)