ISO/TS 19880-1
    Gaseous Hydrogen Fueling Station - General Requirements
   
 Published
      International



Organization International Organization for Standardization (ISO)

Identification

ISO Technical Committee 197

Working Group 24

Gaseous Hydrogen Fueling Station - General Requirements

  • ISO/TS 19880-1

 


Abstract

ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate, for performance of public and non-public fueling stations that dispense gaseous hydrogen to light duty land vehicles (e.g. Fuel Cell Electric Vehicles).

NOTE These recommendations are in addition to applicable national regulations and codes, which can prohibit certain aspects of this document.

It is applicable to fueling for light duty hydrogen land vehicles, but it can also be used as guidance for fueling buses, trams, motorcycles and fork-lift truck applications, with hydrogen storage capacities outside of current published fueling protocol standards, such as SAE J2601.

Residential applications to fuel land vehicles and non-public demonstration fueling stations are not included in ISO/TS 19880-1:2016.

It provides guidance on the following elements of a fueling station:

 - hydrogen production/delivery system

- delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers;

- on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies;

- liquid hydrogen storage;

- hydrogen purification systems, as applicable;

- compression

- gaseous hydrogen compression;

- pumps and vaporizers;

- gaseous hydrogen buffer storage;

- pre-cooling device;

- gaseous hydrogen dispensers.

 


Status

Published 2016. Available at www.iso.ch.

Working Group 24 is continuing activity to lead to an International Standard (IS).

 


Committee
Information

Co-Conveners: Guy Dang-Nhu (France)

                      Glenn Scheffler (USA)